OKM Bionic X4 (2011-2023)
- Classic: Long-range detector with two different detection methods and visual locating software to locate hidden gold treasures at long distances
- Detection range: Customers found treasures in a range of 10 km (6 miles)
- Use cases: Treasure Hunting, Gold Prospection
- Scan modes: Ionic / Bionic
- Detectable objects: Gold nuggets, gold coins, jewelry
Introduction of gold detector OKM Bionic X4:
User instruction for gold detector OKM Bionic X4:
Long-Range Gold Detector with Android Smartphone
The long-range detector Bionic X4 is used to find buried objects at long distances. By using cross pinpointing the exact position of the located object can be determined.
The Bionic X4 long-range gold detector has been developed especially for gold seekers, gold prospectors and treasure hunters, who look for gold at far distances. Unlike traditional long-range detectors, the Bionic X4 can be combined with an Android Smartphone to visually locate gold targets.
Treasure hunter detects gold and silver coin hoard with Bionic X4 in Iran
Bionic 01 (2003-2018)
OKM eXp 6000 Professional Plus (2016-2021)
Detection Methods for Gold Hunting
The Bionic X4 long-range gold detector supports two different detection methods to locate hidden gold treasures:
Ionic Detection Method
The Ionic Detection Method measures the ions radiation (ions absorbent) of buried gold objects. This detection method is only able to locate long time buried gold artifacts.
Bionic Detection Method
During the detection of gold the Bionic Detection Method interacts with the Bio-Energy of the operator’s body to analyze minimum changes of object substances. Thereby the Bionic X4 gold detector is able to locate almost all gold objects. Independent of the age of the gold, the Bio-Energy-System can be used to find freshly buried gold, long time buried gold as well as golden artifacts that are not buried.
The fully automated Bluetooth connection between smartphone and Bionic X4 transfers scan data directly to the smartphone where the data is mapped to the display. Thus, the treasure hunter is able to see the bearing, direction and image through the smartphone camera and fix it for later analysis.
Gold Prospection and Treasure Hunting with Long-Range Detectors
Thanks to the dual scan methods the Bionic X4 gold detector is usable for many tasks like gold prospecting. The main application of this gold long-range detector is the detection of buried gold, i.e. gold jewelry, gold statues, gold rings, gold coins or gold bars (gold bullions).
The Bionic X4 works not only in dry grounds, it is also suitable for humid places, wet soils and can be used after rainy days without any limitations.
The long-range detector reaches best performances in sparsely populated areas. Since the Bionic X4 is very sensitive to changes of the ionic and bionic fields, the accuracy increases greatly in undisturbed or undeveloped areas.
Features and Characteristics
Using the included Android Smartphone increases the Bionic X4 functionality and usability:
- Digital compass for navigation (directional reference)
- Optical fixation of detection direction
- Visual focusing of targets
Gold Hunting with Bionic X4
The Bionic X4 gold long-range detector is especially used for a fast research and prospecting, to explore areas where hidden gold treasures may be buried. It can be used for a first quick examination of an unknown terrain to find places of interest and buried gold treasures, so it is advisable for gold prospectors and treasure hunters who don’t have any clue where to start detecting. The gold prospector can easily and quickly get a general overview of large areas.
The Bionic X4 is especially designed for inaccessible areas where it is hardly possible to walk. Reasons can be accrued forests, rocky mountains or rock faces.
The treasure hunter will use the Bionic X4 gold detector to scan the horizon and find a direction where a higher probability of hidden gold objects can be expected. As soon as the gold direction has been determined, the permanent acoustical signal of the detector will change and the detected direction can be fixed within the display of the Android Smartphone.
To find out the exact position of the gold you have to process a triangulation bearing with the Bionic X4 gold detector. Therefor you have to scan from at least two or more different directions and check if the detector is always responding to gold. As soon as you confirm two or more positive signals, the point of intersection from all directions marks your potential place of gold.
Bionic X4 and Rover UC Bundle
Since the Bionic X4 long-range gold detector is not able to provide any indications about depth and size of the buried gold objects, it is recommended to use a further 3D ground scanner to conduct a detailed ground scan analysis. A very good choice is the Rover UC, which also uses the Android Smartphone as controller and field data analyzer.
By using the Bionic X4 you can locate the place where a high probability of gold may be buried under the ground and the Rover UC can detect the exact position and dependent on the ground conditions the depth and size of the gold artifacts or items of great value.
|1x||Smartphone with USB cable and charger|
|1x||Waterproof and shock resistant Protection case|
|1x||Power Pack with charger and travel adapter|
- Dimensions (H x W x D): 260 x 140 x 220 mm
- Weight: approx. 780 g
- Input voltage (max.): 12 V DC
- Processor / Main CPU: Atmel AtMega CPU, 14.7 MHz
- Operating temperature: 0°C – 70°C
- Storage temperature: –20°– 60°C
- Waterproof: No
- Operating time: 16 hours (without smartphone at USB), 8 hours (smartphone at USB)
- Air humidity: 5% – 75%
- Feedback: acoustic, visual
- Indication: OLED
- Operating temperature: 15°C – 35°C
- Laser beam distance: max. 150 m
- Laser output: max. 3 mW
- Emitted wavelength: 650 nm
- Laser class: 3R (EN 60825-1:2007)
- Technology: Bluetooth 5.1
- Frequency: 2.402 – 2.480 GHz
- Maximum Transfer Rate: 1 Mbps
- Maximum Transmitting Power: +8 dBm
- Maximum Range: approx. 10 m
Computer Minimum Requirements
- Interface (data transmission): USB 2.0
- Free disk space: minimum 250 MB
- Working memory (RAM): 2 GB
- Display: 1920 x 1080
- Processor: 1.2 GHz
- Graphics card: 1 GB RAM, OpenGL 3.3
- Operating system: Windows 10