Obtén las últimas noticias y ofertas exclusivas:
Llámanos: +49 3447 499 300 0
Envíenos un correo: info@okmdetectors.com
   
  • HOME
  • 3D Analysis: Transformations

3D Analysis: Transformations

All transformation settings of the scan images can be found in the Transformation Panel of the Right Sidebar as shown in figure 1. By clicking the Visualization Panel button of the sidebar you can toggle the panel accordingly.

Sidebar Transformations
Figure 1: Transformation Panel of the Right Sidebar

The content of the Transformation Panel is categorized in three groups that will be described in the following subsections.

Rotation

Rotation Value Rotation Value
Enter an angle value in degrees, that is used to rotate the current scan image by using one of the following rotation buttons. Any negative value reverses the rotation.
Rotation around X-axis Rotation around X-axis
Push this button to rotate the current scan image by the entered rotation value around the X-axis.
Rotation around Y-axis Rotation around Y-axis
Push this button to rotate the current scan image by the entered rotation value around the Y-axis.
Rotation around Z-axis Rotation around Z-axis
Push this button to rotate the current scan image by the entered rotation value around the Z-axis.
Reset to Defaults Reset Rotation
Push this button to reset all applied rotations.

 

Translation / Move

Translation Value Translation Value
Enter a value in pixels, that is used to move the current scan image by using one of the following translation buttons. Any negative value reverses the translation.
Move upwards Move Upwards
Push this button to move the current scan image by the entered translation value upwards.
Move left Move Left
Push this button to move the current scan image by the entered translation value to the left.
Move downwards Move Downwards
Push this button to move the current scan image by the entered translation value downwards.
Move right Move Right
Push this button to move the current scan image by the entered translation value to the right.
Reset to Defaults Reset Translation
Push this button to reset all applied translations.

 

Scale / Zoom

Scale Value Scale Value
Select a zoom value from the list to scale the current scan image according to that percentage.
Scale Depth Down Scale Depth Down
Push this button to decrease the visible height of the depth values of the current scan image on screen.
Scale Depth Up Scale Depth Up
Push this button to increase the visible height of the depth values of the current scan image on screen.
Scale Down Scale Down
Push this button to decrease the size of the current scan image on screen.
Scale Up Scale Up
Push this button to increase the size of the current scan image on screen.
Reset to Defaults Reset Scale
Push this button to reset all applied scales.

 


VOLVER ARRIBA