Water detection: Sustainable solution to counter drought and water shortage
The recurring fight against the dehydration of agricultural land as well as against field and forest fires affects the entire world. However, not only habitats are threatened by climate change, global warming and weather extremes such as dehydration and drought: Particularly dry areas, for example near the equator, dry periods and frequent and intense droughts weaken agriculture for several years. Harvest losses due to water shortage lead to famine. The crisis is exacerbated by the lack of clean drinking water.
Solutions to counter water shortage, drought and dehydrationSupplying the affected regions with food and drinking water offers only a short-term solution, which unfortunately cannot reach all affected people. A more sustainable solution could be the support of agriculture and well building: The water detectors GeoSeeker and GeoSeeker Mini allow well builders, construction companies and non-governmental organizations to locate water resources up to 250 m deep, such as groundwater and water-bearing gravel layers. The data measured by the water detector provide an ideal basis for drilling wells. This means that drinking water can also be extracted in dry regions to supply agricultural land such as grain fields and fruit-growing areas with water.
Advantages of using the water finder GeoSeeker Mini
Due to the number of measuring points, the waterfinder GeoSeeker Mini is suitable for a quick search for water resources. The GeoSeeker Mini is language-independent and can be used by inexperienced users thanks to the display of step-by-step instructions and results in simple images and pictograms.
Improved visualization of measurement data of water resources and cavities
Selection of display typeAfter the geoelectric measurement with the waterfinder GeoSeeker Mini, the data is processed. The type of display can thereafter be selected:
- Water: The left button (water drops) leads to the simple representation of water finds. This shows the size and position of potential occurrences of groundwater or water-bearing soil layers relative to the measured field.
- Cavity: The middle button (tunnel entrance) leads to the simple representation of cavities. This shows the size and position of underground caves, tunnels and passages relative to the measured field.
- 2D diagram: The right button (diagram) leads to the scientific indication of all measured data. This shows the occurrence of underground water and/or cavities in the measured field.
If the buttons for water and/or cavity are inactive (light grey), nothing relevant could be detected. In any case, the scientific representation is available to give an overview of all geoelectrical measurement data of the current measurement with the GeoSeeker Mini.
Scientific representation with legendPreviously, the display showed a multicolored 2D diagram, which often required a second reading in the manual for exact evaluation - especially for inexperienced users.
Depending on the selection of the size and depth of the measurement, the display contains several columns and is provided with corresponding depth information.
Simple representation with pictures and pictogramsUsing the left button (water drops) and the middle button (tunnel entrance), you can display simplified representations of the measurement results. Additionally, you can switch between the representations.
Advantages of GeoSeeker Mini at a glance
- simple operation via touchscreen with step-by-step instructions
- simple visual language: can be used by inexperienced users and in all languages
- detects water deposits and cavities up to 100 meters (328 ft) deep
- detects underground groundwater levels, fresh water, drinking water, water veins, watercourses and springs
- detects caves, tunnels, galleries and shafts, chambers and cellars
- supports well builders, drilling companies, agriculture, construction companies, aid organisations and military service providers, but also archaeologists, historians, treasure hunters and subsoil surveyors
For measurements at depths up to 250 meters (820 ft), consider our more powerful geoelectric water detector GeoSeeker.
OKM water detectors in comparison: GeoSeeker Mini vs. GeoSeeker
OKM GeoSeeker Mini
|Max. measuring depth: 100 m (328 ft)
|Total weight: 14 kg
|Data visualization: 2D diagram / simple representation
|Display / Operation: Integrated touchscreen
|Operation time: approx. 8 h
|Storage capacity: 4 measurements
|Max. measuring depth: 250 m (820 ft)
|Total weight: 35 kg
|Data visualization: 3D diagram
|Display / Operation: Android tablet PC (WiFi)
|Operation time: approx. 16 h
|Storage capacity: Unlimited, dependent on Android device
Both, GeoSeeker and GeoSeeker Mini, are geoelectrical detectors used to detect underground water deposits and hidden cavities. In this comparison ...
Water detector OKM GeoSeeker was handed over in December 2017 to "Aktion Pro Afrika" - a nonprofit organization - and ...
OKM Emirates FZE (UAE) and its local business partner GDI - Geological Detection and Imaging (Lebanon) tested the recently announced ...